Innovation Hub
Home
App Factory
Maker Space
Machine Learning
Home
App Factory
Maker Space
Machine Learning
menu
Makerspace
CNC Milling 1: Introduction to CNC Milling
Unit 2
Lesson 4
Course navigation
Unit 1 - Create a 2D Design
Unit 2 - Set up Toolpaths from a 2D Design
1
—
Set up an inner profile toolpath
2
—
Set up Toolpaths from a 2D Design
3
—
Set up a cut-out profile toolpath
4
—
Checkpoint!
Unit 3 - Have a go at CNC Milling
Unit 4 - Create a 3D file for CNC Milling
Unit 5 - Import your Files for 3D Milling
Unit 6 - Set up Toolpaths for 3D Milling
Checkpoint!
<div class='qt-warning'> JavaScript should be enabled to grade this question. </div>
<div class='qt-warning'> JavaScript should be enabled to grade this question. </div>
1 point
The stepover in a toolpaths equals:
The distance by which two separate toolpaths can overlap each other.
The distance between toolpath centre lines between passes in a pocket toolpath
The unit of measurement for the stepper motor controlling the spindle
<div class='qt-warning'> JavaScript should be enabled to grade this question. </div>
1 point
The Start Depth is usually set to:
The top surface of the material
The bottom surface of the material
The maximum depth the tool can reach
<div class='qt-warning'> JavaScript should be enabled to grade this question. </div>
1 point
What key information should always be included in the name of a toolpath?
Order of the toolpath
Speeds and Feeds
Tool type and size
Check Answer